Wnl Trading Corporation

Deep Groove Ball Bearings

Deep groove ball bearings provide trusted efficiency in a large range of applications and conditions. With super-finished raceways and regulated geometries, our premium style helps make sure constant quality. Our portfolio includes basic, thin section, narrow, broad and miniature and extra-small deep groove ball bearings that cover 3 mm to 400 mm bore sizes. The prolonged line of product consists of a total offering of open, guards, seals and snap ring mixes.
Single-Row Deep Groove Ball Bearings - Pressed Steel Cages
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is extremely widespread.
In addition to open type bearings, these bearings frequently have steel guards or rubber seals installed on one or both sides and are prelubricated with grease. Likewise, snap rings are in some cases used on the periphery. Regarding cages, pressed steel ones are the most common.
For huge deep groove ball bearings, machined brass cages are used.
Machined cages are also used for high speed applications.

Bonus Small Ball Bearings and Mini Ball Bearings
Additional Small Ball Bearings and Miniature Ball Bearings
Mini and instrument ball bearings can be divided into two standard types, deep groove and angular contact. The very first (deep groove) can be further divided into the following five classes depending on their style information:
Extended inner ring
Expanded type in which one ring has a radial thickness that is larger than regular compared with the bearing width.
Thin area enter which both rings are additional thin in the radial instructions. They can also be categorized as: open, shielded, or sealed.
Maximum-Type Ball Bearings
Maximum-Type ball Bearings contain a larger number of balls than typical deep groove ball bearings because of filling slots in the inner and outer rings. Because of their filling slots, they are not appropriate for applications with high axial loads. BL2 and BL3 types of bearings have boundary measurements equal to those of single-row deep groove ball bearings of Series 62 and 63 respectively. Besides the open type, ZZ type shielded bearings are likewise offered. When using these bearings, it is necessary for the filling slot in the external ring to be beyond the loaded zone as much as possible. Their cages are pushed steel.
Magneto Bearings
The inner groove of magneto bearings is a little shallower than that of deep groove bearings. Considering that the external ring has a shoulder on only one side, the external ring might be eliminated. This is typically beneficial for mounting. In general, 2 such bearings are utilized in duplex pairs. Magneto bearings are small bearings with a bore diameter of 4 to 20 mm and are mainly utilized for small magnetos, gyroscopes, instruments, and so on. Pushed brass cages are normally utilized.

SNR 634EE Deep Groove Ball Bearings
63009-2RS
45x75x23
SNR 6411N Deep Groove Ball Bearings
681 XZZ
1.5x4x2
SNR 6416M Deep Groove Ball Bearings
4609-1AC2RS
45x75x32
SKF 6408N Deep Groove Ball Bearings
673SSA
3x6x2.5
SKF 6408NR Deep Groove Ball Bearings
6418
90x225x54
SKF 6409 Deep Groove Ball Bearings
68/950
950x1150x90
SKF 6409N Deep Groove Ball Bearings
6411NR
55x140x33
SKF 6409NR Deep Groove Ball Bearings
63802-2RS
15x24x7
SKF 6410 Deep Groove Ball Bearings
6802ZZE
15x24x5
SKF 6410N Deep Groove Ball Bearings
63214 ZZ
70x125x39.7
SKF 6410NR Deep Groove Ball Bearings
676A
6x10x2.5
SKF 6411 Deep Groove Ball Bearings
68/850
850x1030x82
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Bearing Units
Complex Bearings
Cylindrical Roller Bearings
Deep Groove Ball Bearings
Needle Roller Bearings
Plain Bearings
Spherical Roller Bearings
Tapered Roller Bearings
Thrust Ball Bearings
Thrust Roller Bearings
Slewing Bearing
Tapered Roller Bearings Double-Row
Double Direction Thrust Bearings
Double Row Double Row Bearings
Skf Bearing Grease
Ribbed Conveyor Belt
Gates Hd Belt
Gates Green Stripe Belt
K060840 Belt
Unitta Belt